USB3 Vision Camera | HC-CA050-11UM 5.0 MP 2/3" Mono CMOS, USB3.0 Area Scan Camera

USB3 Vision Camera | HC-CA050-11UM 5.0 MP 2/3" Mono CMOS, USB3.0 Area Scan Camera

Model: HC-CA050-11UM

Item specifics

Sensor type: CMOS, global shutter

Sensor: IMX264

Pixel size: 3.45 μm × 3.45 μm

Sensor size: 2/3

Resolution: 2448 × 2048

Max. Frame Rate: 35.1 fps

Mono/Color: Mono

Data Interface: USB3.0

Lens mount: C-Mount

Dimension: 29 mm × 29 mm × 30 mm

Compatibility: USB3 Vision, GenICam

Review

Description

USB3 Vision Camera | HC-CA050-11UM 5.0 MP 2/3" Mono CMOS, USB3.0 Area Scan Camera

HC-CA050-11UM/UC camera adopts Sony® IMX264 sensor to provide high-quality image. It uses USB3.0 interface to transmit non-compressed images in real time, and its max. frame rate can reach 35.1 fps in full resolution.

Key Feature

■ Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.

■ Supports hardware triggering, software triggering and free run mode.

■ Adopts M2 screw holes for securing cable that connects USB3.0 interface.

■ Compatible with USB3 Vision Protocol, GenlCam Standard, and the third-party software based on these protocol and standard.

Dimension

Specification

Model	Model	HC-CA050-11UM
Model	Type	5.0 MP 2/3" CMOS USB3.0 Camera
Camera	Sensor type	CMOS, global shutter
	Sensor	IMX264
	Pixel size	3.45 μm × 3.45 μm
	Sensor size	2/3"
	Resolution	2448 × 2048
	Max. Frame Rate	35.1 fps
	Dynamic range	72 dB
	SNR	40.2 dB
	Gain	0 dB to 15 dB
	Exposure time	UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 s
	Shutter mode	Off/Once/Continuous exposure mode
	Mono/Color	Mono
	Pixel format	Mono 8/10/10p/12/12p
	Binning	Supports 1 × 1, 2 × 2, 4 × 4
	Decimation	Supports 1 × 1, 2 × 2
	Reverse image	Supports horizontal and vertical reverse image output
	Image buffer	128 MB
Electrical features	Data Interface	USB3.0
	Digital I/O	6-pin Hirose connector provides power and I/O, including opto-isolated input x 1(Line0), opto-isolated output x 1(Line1), bi-directional non-isolated I/O x 1 (Line2)
	Power supply	12 VDC, supports USB3.0 power supply
	Power consumption	Typ. 2.8 W @5 VDC (USB3.0 provides power supply)
Mechanical	Lens mount	C-Mount
	Dimension	29 mm × 29 mm × 30 mm (1.1" × 1.1" × 1.2")
	Weight	Approx. 56 g (0.12 lb.)
	Ingress protection	IP30 (under correct lens installation and wiring)
	Temperature	Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F)
	Humidity	20% to 80% RH, without condensation
General	Client software	MVS or third-party software meeting with USB3 Vision Protocol
	Operating system	32/64-bit Windows XP/7/10, 32/64-bit Linux
	Compatibility	USB3 Vision, GenlCam
	Certification	CE, FCC, RoHS, KC