USB3 Vision Camera | HC-CE120-10UC 12 MP 1/1.7" Color CMOS USB3.0 Area Scan Camera

USB3 Vision Camera | HC-CE120-10UC 12 MP 1/1.7" Color CMOS USB3.0 Area Scan Camera

Model: HC-CE120-10UC

Item specifics

Sensor type: CMOS, rolling shutter

Sensor: IMX226

Pixel size: 1.85 μm × 1.85 μm

Sensor size: 1/1.7

Resolution: 4000 × 3036

Max. Frame Rate: 31.9 fps

Mono/Color: Color

Data Interface: USB3.0

Lens mount: C-Mount

Dimension: 29 mm × 29 mm × 30 mm

Compatibility: USB3 Vision, GenICam

Review

Description

USB3 Vision Camera | HC-CE120-10UC 12 MP 1/1.7" Color CMOS USB3.0 Area Scan Camera

HC-CE120-10UM/UC camera adopts Sony® IMX226 sensor to provide high-quality image. It uses USB3.0 interface to transmit non-compressed images in real time, and its max. frame rate can reach 31.9 fps in full resolution.

Key Feature

■ Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.

■ Supports hardware triggering, software triggering and free run mode.

■ Adopts M2 screw holes for securing cable that connects USB3.0 interface.

■ Compatible with USB3 Vision Protocol, GenlCam Standard, and the third-party software based on these protocol and standard.

Dimension

Specification

Model	Model	HC-CE120-10UC
Model	Type	12 MP 1/1.7" CMOS USB3.0 Area Scan Camera
Camera	Sensor type	Rolling shutter CMOS
	Sensor	IMX226
	Pixel size	1.85 μm × 1.85 μm
	Sensor size	1/1.7"
	Resolution	4000 × 3036
	Max. Frame Rate	31.9 fps
	Dynamic range	70.5 dB
	SNR	40.5 dB
	Gain	0 dB to 27 dB
	Exposure time	30 μs to 0.5 s
	Shutter mode	Supports Rolling and Global Reset
	Mono/Color	Color
	Pixel format	Mono 8/10/12, RGB 8, BGR 8, Bayer RG 8/10/10p/12/12p, YUV422Packed,YUV422_YUYV_Packed
	Binning	Not support
	Decimation	Not support
	Reverse image	Supports horizontal and vertical reverse image output
	Image buffer	128 MB
Electrical features	Data Interface	USB3.0
	Digital I/O	6-pin Hirose connector provides power and I/O, including Opto-isolated input x 1 (Line 0), Opto-isolated output x 1 (Line 1), bi-directional non-isolated I/O x 1 (Line 2).
	Power supply	9 VDC to 24 VDC, USB3.0 power supply
	Power consumption	Typ. 3.42 W@5 VDC (USB3.0 provides power supply)
Mechanical	Lens mount	C-Mount
	Dimension	29 mm × 29 mm × 30 mm (1.1" × 1.1" × 1.2")
	Weight	Approx. 80 g (0.2 lb.)
	Ingress protection	IP30 (under proper lens installation and wiring)
	Temperature	Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F)
	Humidity	20% to 80% RH, without condensation
General	Client software	MVS or third-party software meeting with USB3 Vision Protocol
	Operating system	32/64-bit Windows XP/7/10, 32/64-bit Linux and 64-bit MacOS
	Compatibility	USB3 Vision, GenICam
	Certification	CE, FCC, RoHS, KC