USB3 Vision Camera | HC-CH050-10UM 5 MP 2/3" Mono CMOS USB3.0 Area Scan Camera

USB3 Vision Camera | HC-CH050-10UM 5 MP 2/3" Mono CMOS USB3.0 Area Scan Camera

Model: HC-CH050-10UM

Item specifics

Sensor type: CMOS, global shutter

Sensor: IMX250

Pixel size: 3.45 μm × 3.45 μm

Sensor size: 2/3

Resolution: 2448 × 2048

Max. Frame Rate: 74 fps

Mono/Color: Mono

Data Interface: USB3.0

Lens mount: C-Mount

Dimension: 29 mm × 29 mm × 30 mm

Compatibility: USB3 Vision, GenICam

Review

Description

USB3 Vision Camera | HC-CH050-10UM 5 MP 2/3" Mono CMOS USB3.0 Area Scan Camera

HC-CH050-10UM/UC camera adopts Sony® IMX250 sensor to provide high-quality image. It uses USB3.0 interface to transmit non-compressed images in real time, and its max. frame rate can reach 74 fps in full resolution.

Key Feature

■ Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.

■ Supports hardware triggering, software triggering and free run mode.

■ Adopts M2 screw holes for securing cable that connects USB3.0 interface.

■ Compatible with USB3 Vision Protocol, GenlCam Standard, and the third-party software based on these protocol and standard.

Dimension

Specification

Model	Model	HC-CH050-10UM
Model	Type	5 MP 2/3" CMOS USB3.0 Area Scan Camera
Camera	Sensor type	CMOS, global shutter
	Sensor	IMX250
	Pixel size	3.45 μm × 3.45 μm
	Sensor size	2/3"
	Resolution	2448 × 2048
	Max. Frame Rate	74 fps
	Dynamic range	75.4 dB
	SNR	40 dB
	Gain	0 dB to 17 dB
	Exposure time	UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec
	Exposure mode	Off/Once/Continuous exposure mode
	Mono/Color	Mono
	Pixel format	Mono 8/10/10p/12/12p
	Binning	Supports 1 × 1, 2 × 2
	Decimation	Supports 1 × 1, 2 × 2
	Reverse image	Supports horizontal and vertical reverse image output
	Image buffer	128 MB
Electrical features	Data Interface	USB3.0
	Digital I/O	6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
	Power supply	9 VDC to 24 VDC, supports USB3.0 power supply
	Power consumption	Typ. 3.5 W@5 VDC (USB3.0 provides power supply)
Mechanical	Lens mount	C-Mount
	Dimension	29 mm × 29 mm × 30 mm (1.1" × 1.1" × 1.2")
	Weight	Approx. 80 g (0.2 lb.)
	Ingress protection	IP30 (under correct lens installation and wiring)
	Temperature	Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F)
	Humidity	20% to 80% RH, non-condensing
General	Client software	MVS or third-party software meeting with USB3 Vision Protocol
	Operating system	32/64-bit Windows XP/7/10, 32/64-bit Linux and 64-bit MacOS
	Compatibility	USB3 Vision, GenICam
	Certification	CE, FCC, RoHS, KC