10 GigE Camera | HC-CH250-90TM 25 MP 1.1" Mono CMOS 10 GigE Area Scan Camera
10 GigE Camera | HC-CH250-90TM 25 MP 1.1" Mono CMOS 10 GigE Area Scan Camera
10 GigE Camera | HC-CH250-90TM 25 MP 1.1" Mono CMOS 10 GigE Area Scan Camera
10 GigE Camera | HC-CH250-90TM 25 MP 1.1" Mono CMOS 10 GigE Area Scan Camera
10 GigE Camera | HC-CH250-90TM 25 MP 1.1" Mono CMOS 10 GigE Area Scan Camera
Model
HC-CH250-90TM

Item specifics

Sensor type
CMOS, global shutter
Sensor
GMAX0505
Pixel size
2.5 µm × 2.5 µm
Sensor size
1.1
Resolution
5120 × 5120
Max. Frame Rate
41.5 fps
Mono/Color
Mono
Data Interface
10 GigE
Lens mount
C-Mount
Dimension
74 mm × 74 mm × 78.8 mm
Compatibility
GigE Vision V2.0, GenlCam

Review

Description

10 Gigabit Ethernet – fast, reliable and easy integration
Gigabit Ethernet is the most widely used interface in industrial image processing due to low system costs, cables up to 100 m in length and the GigE Vision standard for easy integration. The ongoing trend toward higher resolution and speed due to ever faster production cycles and new CMOS sensors calls for cameras with increased transmission bandwidth. 10 Gigabit Ethernet allows for transmission of 10 times more image data at 1.1 GB/s while at the same time providing all the advantages of Gigabit Ethernet interfacing without requiring a change to integration software.
Quick and easy integration
More and more PC motherboards support the 10GBase-T interface for direct implementation of 10 GigE cameras. Alternatively, low-priced 10GBase-T standard network cards allow for easy one-cable solutions with data and power (Power over Ethernet) over the same cable. However, Camera Link or CoaXPress always require an additional frame grabber card.

From GigE Vision Standard version 2 onward, changing the application software during the camera integration is a thing of the past, since the software is fully separated and autonomous from the Ethernet interface. Programming using GenICam remains the same, and operation together with GigE Vision cameras is easily achievable.
High bandwidth for cables up to 100 m
The 10 GigE interface provides stronger solutions for applications requiring high bandwidth for long-distance transmission up to 100 m with a single cable, but eliminates the need for specialized components such as frame grabbers.
Under the label 10GBase-T, the Ethernet standard IEEE 802.3an defines the use of twisted pair cables. CAT6 cables are allowed for up to 55 m distance. Greater distances call for CAT6a cables.
For existing CAT5e installations where replacing the present cabling is economically infeasible, transmission rates of 2.5 or 5 Gbit/s are recommended. Transmission speed is defined in standard IEEE 802.3bz of the NBASE-T Alliance.
10 GigE Camera | HC-CH250-90TM 25 MP 1.1" Mono CMOS 10 GigE Area Scan Camera
HC-CH250-90TM/TC camera adopts Gpixel GMAX0505 sensor to provide high-quality image. It uses 10 GigE interface to transmit non-compressed image in real time, and its max. frame rate can reach 41.5 fps in full resolution.
Key Feature
■ Resolution of 5120 × 5120, pixel size of 2.5 μm × 2.5 μm. 

■ Adopts 10 GigE interface providing maximum transmission distance of 100 meters. 

■ Supports adjustment for exposure time, gain, Look-Up Table (LUT), Gamma correction, etc. 

■ Mounting holes on panels for flexible installation. 

■ Compatible with GigE Vision Protocol V2.0, GenlCam Standard, and third-party software based on protocols.
Dimension
Specification

Model

Model

HC-CH250-90TM

Type

25 MP 1.1" CMOS 10 GigE Area Scan Camera

Camera

Sensor type

CMOS, global shutter

Sensor

GMAX0505

Pixel size

2.5 µm × 2.5 µm

Sensor size

1.1"

Resolution

5120 × 5120

Max. Frame Rate

41.5 fps

Dynamic range

63 dB

SNR

36 dB

Gain

2.0x to 5.0x

Exposure time

13 μs to 10 sec

Exposure mode

Off/Once/Continuous exposure mode

Mono/Color

Mono

Pixel format

Mono 8/10/10p/12/12p

Binning

Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4

Decimation

Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4

Reverse image

Supports horizontal and vertical reverse image output

Electrical features

Data Interface

10GigE

Digital I/O

12-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1

Power supply

9 VDC to 24 VDC

Power consumption

Typ. 9.7 W@12 VDC

Mechanical

Lens mount

C-mount, optical back focal length 17.52 mm (0.7")
M58-mount, optical back focal length 11.48 mm (0.5")

Dimension

74 mm × 74 mm × 78.8 mm (2.9" × 2.9" × 3.1")

Weight

C-mount camera: approx. 590 g (1.3 lb.)
M58-mount camera: approx. 550 g (1.2 lb.)

Ingress protection

IP40 (under proper lens installation and wiring)

Temperature

Working temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature: -30
°C to 70 °C (-22 °F to 158 °F)

Humidity

20% to 95% RH, non-condensing

General

Client software

MVS or third-party software meeting with GigE Vision Protocol

Operating system

32/64-bit Windows XP/7/10

Compatibility

GigE Vision V2.0, GenlCam

Certification

CE, FCC, RoHS, KC

Download
HC-CH250-90GM/GC/GN GigE Area Scan Camera_datasheet
UD24434B_10 GigE Area Scan Camera User Manual

HC-CH250-90TM/TC Drawings